2001 Toyota Tundra Rack And Pinion Replacement Bolts
Got my truck aligned today they pointed out my bushings are bad on the rack and pinion so gotta change those leaking oil I noticed before when I changed the tie rod boots.
2001 toyota tundra rack and pinion replacement bolts. A Remove the 2 bolts 2 nuts and power steering gear. Eventually I got it in and put the center bolt in to keep it in place. Toyota Tundra 2004 Hydraulic Power Steering Rack and Pinion Assembly by Vision-OE.
They have reman units at like 350 and aftermarket units starting at like 230. Twin Post Lift or floor jack and jack stands Under Hoist Jack Stand If using a twin post lift Sockets 1217 19 mm Deep Socket 17 mm Combination Wrench 19 22 mm Ratchet Large Standard Screwdriver Diagonal Cutting Pliers Channel lock. Because the nut has its own stopper do not turn the nut.
I got roughly 310xxx miles. I needed to replace my rack and pinion on my 2001 tundra. Vision-OE Hydraulic Power Steering Rack and Pinion Assembly.
When putting the rack in my aftermarket bushings were a tight fit in the middle attachment. It appears my power steering rack is starting to leak due to rust damage from 10 years of midwest road salt. Loosen the bolt with the nut fixed.
Rubber bushings can wear down and degrade over time and affect your Toyotas handling but polyurethane rack and pinion bushings will increase the responsiveness of your steering. Rack and Pinion replacement on a Toyota TacomaPlease like and subscribeThanks for watching. Major fixes are the coil packs LCA bushings shocks and struts and tie end rods.
It looked and felt the same quality as the OEM part that failed. ShopDealer Price 187048 - 281053. Service type Steering RackGearbox Replacement.