2006 Toyota Tundra Reset Low Tire Pressure Light
Start the car and wait 20 minutes for the sensor to refresh.
2006 toyota tundra reset low tire pressure light. Stop the engine. There is a button to do this. Turn the ignition key to ON.
Turn the ignition key to the ON position without starting the engine. Low tire pressure warning light override. The tire placard located on the door panel.
There are two ways to reset the indicator light - the first is to hold down the button hidden under the dashboard next to the steering column until the light goes out. Use a tire pressure gauge to check the tire pressure. Hold the TPMS reset button until the tire pressure light blinks three times then release it.
The system should only be reset when all of the tires. 10 Remove the 4 10mm bolts under the stereo and pull the stereo out. Contact your Toyota dealer.
If you have a Toyota Camry with the tire pressure warning light on here is what to do and why it came on. Turn the ignition key to the ON position without starting the engine. The TPMS reset button is usually located beneath the steering wheel.
Many Toyota Tundra models are outfitted with a tire-pressure-monitoring system that displays a low-tire-pressure warning on the control panel if it detects one of the tires is low. Apply the parking brake and turn the ignition to ON position with the engine OFF not the ACC position. The tire placard located on the door panel.