2001 Toyota Tundra Removing Upper Ball Joint
The ball joint stud will release from the knuckle.
2001 toyota tundra removing upper ball joint. 2-lower control arm frame bolts. APS Compatible with Toyota Tundra 1999-2002 Main Upper Stainless Steel Black 8x6 Horizontal Billet Grille Insert T85483J 8199 VHT SP114 FlameProof Coating Flat Orange Paint Can - 11 oz. A ball joint consists of three pieces.
Front Suspension Upper Ball Joint problem of the 2001 Toyota Tundra 15. Especially designed for heavy-duty wear and tear these ball joints will handle the toughest work you can throw at them and. The upper ball joint is riveted or bolted in.
314392 live center forcing screw. See All Products Details. Remove the three bolts securing the ball joint to the control arm using the 38-inch drive ratchet and a socket.
The wheel remained under the vehicle attached to the front drive shaft. Mar 14 2019 at 457 PM 1 1. Discussion in 1st Gen Tundras 2000-2006 started by growit Mar 14 2019.
Mine were the originals and had been in there for 7 years. Put the spindle back on using the jack if necessary and put the nut back on and tighten. 8 Jun 30 2010.
The other cup goes over the pivot. Assemble the ball joint press over the control arm as shown in Figure 3. Front Driver or Passenger Side Upper Recommended Use.