2001 Toyota Tundra Rear Bumper Removal

Inside your trunk remove small back clips in trim panel.

2001 toyota tundra rear bumper removal. Seems pretty extensive scrub bumper with mild soap rinse with DI water dry degrease sand bumper clean again with soap and rinse with DI water degrease with anti-static plastic cleaner apply plastic parts adhesion promoter apply plastic parts primer. So is it pretty easy to do. Remove tail lamp four 8mm nut perside unplug wires.

The center portion has the same plastic tabs and two plastic hooks youll have to bend in a little behind the license plate. It should be a 10mm. - Turn the wheels to the left or right side depending on which side we will disassemble first.

This can wait if you choose. That looked slightly challenging. Posted on Jul 20 2009.

All the same-as-original bumpers from K-Metal are a perfect option to go if you want to restore and maintain the original look of. - unscrew the screws around the perimeter of the lower part tightened from the bottom up. Remove the metal cross bar above the upper portion of the bumper.

All the same-as-original bumpers from K-Metal are a perfect option to go if you want to restore and maintain the original look of. Toyota Solara -Under the hood unscrew the screws and pull out the pistons screwed and inserted from top to bottom that secure the upper part of the bumper and the radiator grill. I saw a youtube video where this kid replaced his tundras bumper but only the cosmetic part of the bumper the outer shell so no the part that goes to the frame.

Remove the bumper arm-to-body bolts from each side of the bumper. Schemes of fastening of front and rear bumpers. You might have to move the 14 liner over a bit to fond them.