2000 Toyota Tundra Rear Bumper Removal

I have used the search feature and I still cant find it.

2000 toyota tundra rear bumper removal. Find discussions on the Toyota Tundra Diesel TRD Pro SR5 lift kits towing capacity classifieds and more. Next underneath the bumper there are 2 clips that you need to pull out with a flat head screw driver they point straight to the ground and are holding the bumper extenders in place Then the easy part remove the 14mm bolts 2 on each side attached to the frame. Remove tail lamp four 8mm nut perside unplug wires.

The 2UZ-FE engine can pull around 7200 lbs but the hitch and bumper can only do the 5000 lbs unless you get a Class 4 hitch. After those bolts are removed you can pull the sides of the cover away from the quarter. -With an assistant we release the corners from the latches in the wings and remove the bumper from the guides on ourselves.

Remove the 2 screws that hold on the license plate covers. Remove the license plate bulb covers. Does anyone have a link to a thread with instructions on how to remove the front and rear bumper.

-around the bottom part Unscrew the screws and take out the caps twisted and inserted from the bottom up. Toyota Tundra 2000 Rear Bumper Face Bar by Replace. Unplug and remove the Trailer Plug.

Then turn it over and undo about a zillion clips with needle nose pliers to take the three top plastic pieces off. Can someone please help me out I thought I saw it on this forum or maybe it was on another forum. There is a screw on each side of the bumper cover at the wheel wells.

2000 Toyota Tundra 1099. There are 3 plastic bumper covers. Joined Dec 29 2008.