2000 Toyota Tundra Keyless Entry Remote Programming

The process of programming a new Toyota keyless entry remote involves three phases.

2000 toyota tundra keyless entry remote programming. Step by step guide. Steps 2 and 3 should be performed within 40 seconds. I took my 2001 Toyota Tundra to the dealer today with the promise that the programming of a new remote would cost me about 4500 and about 45 minutes.

It requires the installation of a new lock kit and the programming of keyless entry remotes to operate with that specific lock system. With the key OUT of the Ignition OPEN and UNLOCK the Drivers door. Insert the key into the ignition and remove it.

2000-2002 Toyota Tundra 2-Button Dealer Installed Key Fob Remote FCC. The drivers door open and unlocke. Locate the ECU next to steering column and above the air duct for the feet.

2000 tundra keyless remote. I dont remember exactly what I did. Close and open drivers door TWICE.

Perform these steps within 40 seconds. Perform the following steps within 5 seconds. It only came with one keyless entry remote and I was able to buy another OEM off eBay pretty cheap.

I just found these on these instructions on the web. Insert the key into ignition switch and turn it to ON. The STATUS MONITOR LED.