2000 Toyota Tundra Horn Doesn T Work

I removed the air bag the steering wheel the clock spring and the multi-switch it operates the cruise control and the windshield wipers.

2000 toyota tundra horn doesn t work. I turned my steering wheel and the horn started working but when I straightened it back out it stopped working. The stop lights do not work but the high mount stop lamp works. HiI have toyota rav4My horn doesnt workIt works only when I connect straight wire from ground to the horn switch on the steering wheelI just touched wire to the horn switch and it worked without.

Discussion in 2nd Gen Tundras 2007-2013 started by Walker Feb 4 2017. It was quite a process. 2000 Tundra horn problem Moving this to the 1gen forum.

As far as your issue could be the spiral cable within the steering column. Took steering wheel and controls off column to expose bearings in column borrow steering wheel puller from Auto Zone you will need it. Worked for 2 miles then works 10 of.

On a vehicle without a rear spoiler. Vehicle Speed Sensor VSS 28. There are three legs at the Body ECU under the dash.

I bought my Tundra with 100k miles. Check all three with a test light or DMM. Underneath all of that is a ring of ball bearings - they were badly rusted and dirty.

This is a common problem for a lot of makemodels including the Toyota Sequoia. It had only one other owner and bought it for just over 10k cash. The dealer says that there is no relay on my model.