2000 Toyota Tundra Bolt And Washers

The bed bolts were not that difficult to source once I knew what I needed.

2000 toyota tundra bolt and washers. Remove the lower strut mounting bolt. Loosen the lower control arm frame bolts. Enjoy it cause it will pretty much.

Wholesale Prices Fast Shipping. Genuine Toyota Parts the Right Choice. Carefully place the DriverLeft Sidebar onto the 3 Brackets.

They want you to fish the bolt and washer through the frame and the mount at the same time not going to happen with only 2 hands so i went to ace hardware and got some neoprene washers to slide over the bolts to hold them in the frame holes then gently slid the. 9mm Hook 9x4 Hook 316 Side Lock 7mm Bayonet Side Pin 22mm Pinch Tab Push Button 22mm. Choice 2 Dark almost black washer.

Wheelers Leaf Spring U-Bolts for Tacoma Tundra and Other Applications. I just created a 1 body lift kit and heavily researched Gen1 Tundra bolt sizes. Toyota Tundra 47L 2000 Cylinder Head Gasket Set by Enginetech.

Line up the horizontal top slot in the Bracket with the Hex Bolt Figure 6. They will fit Tacoma 4x4 PreRunner Tundra and many other applications that require a 916 square radius U-bolt with a 2-916 ID. These SQUARE RADIUS Grade 5 U-bolts are available in 675 775 85 and 95 lengths measured from the inside of the bend radius to the end of the threaded leg.

Parts fit for the following vehicle options. Finally the washers for M6 bolts are all kind of. Be very careful not to damage core.