04 Toyota Tundra Headlight Adjustment

Use the mark as a reference point for your headlights.

04 toyota tundra headlight adjustment. The picture below is from early 2nd gen Tundra. You want the low beam to be within two-inches of the mark. Dont drive with broken or missing lights and.

Chrome housing clear lens. You adjust each headlight individually. If you want to adjust them horizontaly the upper adjustment upper gear is located on the top of the light.

Using a Phillips head screwdriver you can adjust its vertical aim. In the post above my truck was farther back but I can tell you the LEDs are significantly brighter than the HIDs. Toyota Tundra 2004 Replacement Headlight by Replace.

Red arrow indicates the side-to-side adjuster and his finger. I noticed your truck is 1st gen. Not so much a screw but a knob with screw-type threads around it.

Insert a number 2 Phillips screwdriver into the hole in front of the mounting screw on the headlight assembly. Unplug the two harnesses that hook into the headlight if needed and it is ready to be removed the car. Gently work it out of position.

- back the truck away from the wall to a distance of 3 meters 984 feet from the wall surface to the headlights - turn on low beams - the low beams should hit the wall 209 mm 0823 in _below_ the line headlamp height based on designed 4. You adjust each headlight individually. On my 06 Tundra DC you need to remove the amber corner lights to really gain access to the vertical adjustment.