04 Toyota Tundra Gauge Removal
Tank is full the float is at the top and the gage reads full.
04 toyota tundra gauge removal. Remove tach 5 screws. Remove the optical diffuser by releasing the two clips. Park the Toyota Tundra on a level surface and set the parking brake.
Remove the four bolts holding the stereo in place using a 10 mm socket. Tundra 2WD V8-57L 3UR-FE 2007 Tundra Access Cab LTD 4WD V8-47L 2UZ-FE 2001. 6 Feb 4 2007.
Tank is empty the float is in the bottom of the tank and the gage reads empty. It is located in the gas tank. I removed the cluster from my 04 Silverado and sent it in for repair and replacement of the bulbs.
Erratic readings occur when the instrument cluster goes bad the sender goes bad or the wires. Pull outward and down under the ignition to allow the black bezel to slide out. Toyota - Auto - 2004-tundra-manual Updated.
Twist the radiator cap one full turn pause for a few seconds and then fully remove the cap. Once the black bezel is out you will see the 4 Phillips head screws holding the instrument gauges in place. You can try banging on the tank sometimes the float arm on it gets rusty and will get stuck in one position and the banging will free it up.
It is just a float in the tank on a metal rod with a resistor attached. Even when it is 90 degrees outside and Im running it hard. The fuel sending unit has gone out.