02 Toyota Tundra 4.7 Throttle Motor

Also pedal play may be an issue but even then it should accelerate on flat surface.

02 toyota tundra 4.7 throttle motor. After you take the intake manifold cover off the sheet metal piece that says 47 on it you will see where the plastic intake tube leads to on the engine. Magnetic clutch is mounted between the throttle motor and the valve and it connects the throttle motor with the throttle valve. Does not have any engine codes.

The fools the fools the fools. Maybe the Throttle wire is stuck or not set correctly. The valve gets stuck shut or open during cold temps and throws a code.

I could reset by turning off and starting again reset the computer. Since this feature is only used to control emissions under a cold start it isnt necessary and can be bypassed with a. P0120 TOYOTA code description The throttle position sensor responds to the accelerator pedal movementThis sensor is a kind of potentiometer which transforms the throttle position into output voltage and emits the voltage signal to the Engine Control Module In addition the sensor detects the opening and closing speed of the throttle valve and feeds the.

The main problem associated with it is the secondary air pump failure. This throttle body has a TPS throttle position sensor and a Accelerator pedal sensor on it. 100 computerized testing of motor throttle position sensor and articulation ensures reliable and consistent performance Specialized component cleaning process prevents the throttle bore surface from being deformed and ensures optimum airflow.

The idler pulley c. Any ideas what to look for. 2012 Toyota Tundra 57 Liter V8 Engine.

The TPS is on the drivers side and the APS is on the pass side of the throttle body. There is some throttle linkage on the left side of the threttle body spray the sh t out of it with WD40 and work the linkage back and fourth with your hand letting it snap back a couple of times. Most auto repair shops charge between 75 and 150 per hour.